deform reinforcing steel bar

deform reinforcing steel bar

Reinforcing Deformed Steel Bar: Size and Weight …

The deformed Reinforcing Steel Bar is supplied in length of 9m or 12 m as common sizes. The steel bar diameter applied is different and accordingly the weight varies. We are listing theoretical unit weight list of commonly used wire gauge below for your reference.

Deformed Mild Steel Bar for Concrete Construction Reinforcing

At JinDing, we focus on concrete reinforcing steel bar, ribbed steel bar, deformed bar, round or square bar, reinforcing mesh, steel fiber, steel bar grating, angle steel and series steel materials for construction application.

Rebar - Wikipedia

Rebar (short for reinforcing bar), collectively known as reinforcing steel and reinforcement steel, is a steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension.History·

Deformed Bar for Concrete Welded Mesh in Construction

Higher tensile strength. Concrete welded mesh is made by reinforcing steel bar or deformed bar. Deformed bar has high tensile strength. Then it transfer to the concrete welded mesh. PC strand is made by several pieces of plain or deformed bar.

Using Deformed Reinforcing Steel Bar - AAA Concreting

Reinforcing steel and bar is also known as reo mesh, rebar, re-bar or reo bar. It is used to strengthen concrete because of its poor tensile strength. The presence of deformed bar is key to help concrete to adhere to a bar’s surface.

Standard Specification for Deformed and Plain Carbon-Steel ...

1.1 This specification covers deformed and plain carbon-steel bars in cut lengths and coils for concrete reinforcement. Annex A2 of this specification covers deformed bars for use for other applications. Steel bars containing alloy additions, such as with the Association for Iron and Steel Technology and the Society of Automotive Engineers series of alloy steels, are permitted if the resulting ...

Deformed Reinforcing Bar(Rebar) - Liberty Reinforcing

Deformed bar is a Class N (normal ductility) reinforcing bar used in a range of applications from reinforced concrete slabs to prefabricated beams, columns, cages and precast products. Also known as rebar, deformed bar complies with AS/NZS 4671 : 2001 Steel reinforcing materials and is available in 500 MPa from 10 mm - 40 mm bar diameters.

Rebar Vs Deformed Bar Anchor - Structural engineering ...

eng-tips› Forums› Structural Engineers› ActivitiesA DBA (deformed bar anchor) is simply a piece of deformed steel bar or wire, which is welded onto a plate or other embed, and the bar develops using standard ACI development criteria. In order to rely on ACI computations for development, the deformations must meet the relevant ASTM for deformed bar or wire for concrete reinforcement.A deformed bar anchor is more like a headed stud with deformations on the shaft. Typically they thread the end of a reinforcing bar and screw on a "hockey puck" The development length is much shorter than a typical rebar and because of the deformations on the shaft it is shorted than a nelson stud. They are very useful when you are trying to develop beam reinforcing at an exterior concrete column. They reduce congestion. I have used them a couple of time with great success. The contractors were thrilled to have less congestion. The ones I've used were provided by ERICO.Quote (tolchijb) Typically they thread the end of a reinforcing bar and screw on a "hockey puck" So it seems you are comparing a typical rebar to a rebar with the additional "hockey puck" headed stud. erico/public/library/concrete/lt043... I am asking about the deformed bar anchor and how is it different from typical rebar. ie: you have a #4 rebar vs a 1/2" DAS....no "hockey puck" on either. Are they interchangeable? What makes them different?I think normally the deformation is a 'inny', instead of a 'outy' and its weldable properties.ASTM A496 is deformed wire, not specifically used for this purpose, and still subject to limitations regarding weldability. A615 is standard rebar, which is not specifically weldable, but may be weldable based on chemistry and conditions of welding. A706 is weldable rebar (also with higher ductility and with a cap on strength.) A DBA (deformed bar anchor) is simply a piece of deformed steel bar or wire, which is welded onto a plate or other embed, and the bar develops using standard ACI development criteria. In order to rely on ACI computations for development, the deformations must meet the relevant ASTM for deformed bar or wire for concrete reinforcement. Plates or other embeds can be anchored by DBA or stud, and the two behave differently in concrete.Thanks TX. Your explanation and Section 3.5.3 in the ACI code explained it quite clearly. As a follow up, what is a typical application for deformed wire (ASTM A496) besides WWR?Deformed wire can be used any place deformed rebar can be used. It is seldom used in straight lengths, aside from specialty manufacturing. Because making it requires additional processing (drawing to size and then cold rolling deformations), it seldom is economical to use when hot rolled rebar is available. There can also an issue with ductility (low) and yield strength (high), as well as yield/tensile spread (narrow), for some uses.1rebar / all-thread vs.deformed ??Mar 31, 2010DBA = deformed bar anchor ??Jun 23, 2008See more results

Using Deformed Reinforcing Steel Bar - AAA Concreting

Reinforcing steel and bar is also known as reo mesh, rebar, re-bar or reo bar. It is used to strengthen concrete because of its poor tensile strength. The presence of deformed bar is key to help concrete to adhere to a bar’s surface.

Deform Reinforcing Steel Bar Wholesale, Reinforcement ...

Alibaba offers 7,825 deform reinforcing steel bar products. About 79% of these are steel rebars, 8% are metal building materials, and 3% are steel round bars. A wide variety of deform reinforcing steel bar options are available to you, such as astm, aisi.

Deformed Reinforcing Bar(Rebar) - Liberty Reinforcing

Deformed reinforcing bar is a Class N (normal ductility) reinforcing bar used in a range of applications from reinforced concrete slabs to prefabricated beams, columns, cages and precast products. Also known as rebar, deformed bar complies with AS/NZS 4671 : 2001 Steel reinforcing materials and is available in 500 MPa from 10 mm - 40 mm bar diameters.

Deformed Steel Bar Supplier - Power Steel Products

A deformed bar is a type of concrete rebar with a rough surface for better cement or mortar bonding. It is a steel bar with surface projections to improve the bond strength when used in reinforced concrete.

Deformed Steel Bars – Arab Building Materials Co.

Deformed Steel bars are commonly used in reinforced concrete and reinforced masonry structures. It is usually formed from carbon steel, and is given ridges for better frictional adhesion to the concrete.

Steel Rebar - Steel Reinforcing Bar - Concrete Rebar ...

Wholesale Steel Rebar Supplier. Harris Supply Solutions supplies wholesale rebar to businesses throughout the U.S. Reinforcing bar, or rebar, is a common steel bar that is hot rolled and is used widely in the construction industry, especially for concrete reinforcement.

REBAR, DEFORMED STEEL BAR, DEFORMED REINFORCING BAR

RM deformed reinforcing bar (rebar) is commonly used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression and has more tensile stresses than that of mild steel plain bars.

Rebar Vs Deformed Bar Anchor - Structural engineering ...

eng-tips› Forums› Structural Engineers› ActivitiesA DBA (deformed bar anchor) is simply a piece of deformed steel bar or wire, which is welded onto a plate or other embed, and the bar develops using standard ACI development criteria. In order to rely on ACI computations for development, the deformations must meet the relevant ASTM for deformed bar or wire for concrete reinforcement.

concrete reinforcing bar (rebar) - Sizes

Besides mild steel, rebar is also made in stainless steel (cost-effective, for example, for concrete bridges where salt is spread on winter ice) and other specialty alloys. Almost all bars are “deformed,” that is, a pattern is rolled onto them which helps the concrete get a grip on the bar.

Reinforcing Steel – Mesh and Bar

Reinforcing Steel Mesh & Bar Pty Ltd use 500 Mpa Reinforcing Steel from both long bar and coil products that are manufactured from fully recycled material. Our Reinforcing Steel is available in diameters ranging from 10mm – 36mm, each of these diameters are available in a variety of stock lengths – 6, 9, & 12 metres.

CRSI: Bar Identification - Concrete Reinforcing Steel ...

There are a number of ways to identify reinforcing bar (rebar) from the production mill to the fabrication shop to the jobsite. This documentation and marking system helps provide a wealth of useful information about the manufacturing and composition of each bar of reinforcing steel.

SUMA METAL - Steel Rebar Stainless Steels Professional

Sixteen years China Supplier of Steel rebars, rod, carbon steels, stainless steels, taper shank twist drills, nails, etc Build the world TOGETHER.Contact us

Standard Specification for Deformed and Plain Stainless ...

This specification covers deformed and plain stainless steel bars for concrete reinforcement proposed to be used in applications requiring corrosion resistance or controlled magnetic permeability. For each specimen, one tension test, one bend test, if required, and one set of dimensional property ...

Deformed Reinforcing Bar - arcreo.au

Product Info. We supply a comprehensive range of standard N grade, 500 MPa deformed reinforcing bar (D500N). Stock lengths are available off-the-shelf, but rebar is often supplied processed (cut, bent, threaded) or fabricated to suit the specific requirements of your project.

Get In Touch24/7 Support

ADD : XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA

TEL : 0086-371-86151827

FAX : 0086-371-86011881