M2 High Speed Steel Structural

M2 High Speed Steel Structural

High Speed Steel - Saaj Steels Corporation | High Speed ...

The chemical composition of M42 molybdenum high speed tool steel is outlined in the following table.M42 tool steel can be drilled, turned, threaded, broached, milled and tapped when it is in its annealed condition and rated at 45% of 1% carbon steel.M42 molybdenum high speed tool steel is preheated to 871°C (1599°F) in a slow manner and then soaked.

M2 High Speed Steel - Hudson Tool Steel Corporation

M2 High Speed Steel. M2 High Speed Steel (M2) is a tungsten-molybdenum high speed steel with a well balanced composition suitable for a wide variety of applications. World wide, the M2 type is by far the most popular high speed steel having replaced T1 high speed in most applications because of its superior properties and relative economy.

M2 High Speed Steel - Griggs Steel

Our M2 is a general purpose molybdenum-type high-speed steel exhibiting well-balanced toughness, wear-resistance and red hardness properties. This grade is commonly used in cold work punches and dies and cutting applications involving high-speed and light cuts.

M2 Steel | 1.3343 | HS-6-5-2C | SKH51 | W6Mo5Cr4V2 | 2722

M2 steel is a High speed tool steel, we supply M2 steel round bar, flat bar, sheet, wire, plate and others shape, also help customers cutting and milled..

SKH9 Tool Steel –M2 | 1.3343 | HS 6-5-2 | W6Mo5Cr4V2 ...

JIS SKH9 Tool Steel –M2 | 1.3343 | HS 6-5-2 | W6Mo5Cr4V2 | 2722. SKH9 Tool Steel Reference standard: ASTM A600, DIN 17350, EN ISO 4957, JIS G 4805, GB/T 9943, SS14. Download Full Datasheet. JIS SKH9 Steel is a old JIS Steel grade standard, it same with SKH51 high speed steel.

M2 Molybdenum High Speed Tool Steel (UNS T11302)

Molybdenum high speed steels are designated as Group M steels according to the AISI classification system. Over 95% of high-speed steels manufactured in the US are group M steels. Tungsten is present in all types from M1 to M10, except M6, and cobalt is not present in any these steels.

High Speed Steel (Grades: M2,M35,M42) | P20 Steel - Hot ...

M42 is a molybdenum-series high-speed steel alloy with an additional 8% cobolt. It is widely used in metal manufacturing because of its superior red-hardness as compared to more conventional high-speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes.

Conventional High Speed Steels | Erasteel

High Speed Steels are high-performance special steels offering high hardness at temperatures up to 500°C and high wear resistance, thanks to alloying elements like tungsten, molybdenum, vanadium and chromium which are able to form carbides.[PDF]

M2 High Speed Steel - West Yorkshire Steel

specific sizes. Ground tool steel bar can be supplied, providing a quality precision diameter to tight tolerances. Contact our experienced sales team who will assist you with your M2 high speed steel enquiry. Flat Diameter Applications Typical applications for M2 high speed steel are twist drills, reamers, broaching tools, taps, milling tools, metal saws.

High-speed steel - Wikipedia

High-speed steel (HSS or HS) is a subset of tool steels, commonly used as cutting tool material. It is often used in power-saw blades and drill bits . It is superior to the older high- carbon steel tools used extensively through the 1940s in that it can withstand higher temperatures without losing …History·

AISI M2 Tool Steel - High Speed Steel | Steel Bar

M2 High Speed Steel. AISI M2 Tool Steel is a tungsten-molybdenum type,general purpose hss steel that as per AISI/ASTM standard. The wear resistance is better than AISI T1 steel. M2 Steel has higher hot hardness, it can withstand increases in temperature without losing its temper.

M3 High Speed Steel - Griggs Steel

M3 high-speed tool steel contains carbon and vanadium levels that are intermediate between those of M2 and M4. This gives the steel a fine balance of wear-resistance and grindability, and provides superior resistance to abrasion and edge breakdown.

High Speed Steel | Tool Steel | Compare Tool Steel

High-speed steels exhibit high strength and hardness, but typically exhibit lower toughness than the cold work tool steels. Some, most notably M2 and powder metal M4, are used in cold work applications because of the strength and wear resistance which can be achieved.

M2 High Speed Steel - Detect-metals

M2 Molybdenum High Speed Tool Steel (UNS T11302) Equivalent grades: SKH51/SKH9/W6Mo5Cr4V2. Introduction. Molybdenum high speed steels are designated as Group M steels according to the AISI classification system. Over 95% of high-speed steels manufactured in the US are group M steels.

M2 Steel | 1.3343 | HS-6-5-2C | SKH51 | W6Mo5Cr4V2 | 2722

M2 steel is a High speed tool steel, we supply M2 steel round bar, flat bar, sheet, wire, plate and others shape, also help customers cutting and milled.. Toggle SlidingBar Area Home

M2 Steel Rod Supplier,M2 High Speed Steel Rod,M2 Tool ...

M2 high speed Steel Grades : AISI M2 (DIN-1.3343) (IS-XT8W6Mo5Cr4V2) High Speed Steel Round Bar M2 high speed Steel Rod Diameter : 10mm ~ 300mm Type : Flats, Round, Square, Forged.

High Speed Steel M2 Cutting Tool Steel Round Bars

AISI 4340 alloy steel round bar S136 steel bar 1.2601 cold work steel bar

High Speed Steel | Tool Steel | Compare Tool Steel

To qualify as a high-speed steel, the chemical composition must meet certain minimum requirements, which are defined in the ASTM A600 Specification for High-Speed Tool Steels. The lowest alloy grades, M50 and M52 high-speed steels, are properly known as intermediate high-speed steels because of their lower alloy contents.

M2 High Speed Steel - West Yorkshire Steel - Only £25 UK ...

M2 high speed steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of M2 high speed steel in round bar, sheet and plate which can be bandsaw cut to your specific requirements.

AISI M2 Tool Steel - High Speed Steel | Steel Bar

M2 High Speed Steel. AISI M2 Tool Steel is a tungsten-molybdenum type,general purpose hss steel that as per AISI/ASTM standard. The wear resistance is better than AISI T1 steel. M2 Steel has higher hot hardness, it can withstand increases in temperature without losing its temper. AISI M2 steel offers high toughness combined with good cutting powers.

High Speed Steel - High Speed Steel(HSS)-M2, M35, M42, …

Tradewell Ferromet can offer M2 High Speed Steel, M2 High Speed Steel Rod, M2 Rods, M2 Round Bar, M-35 Bars HSS M2 Tool Steel, HSS M2 Die Steel, M2 Steel Bars, High Speed Steel Rod, High Speed Steel, HSS Steels from ready stock. M2 is a standard high-speed steel grade.

M3 High Speed Steel - Griggs Steel

M3 high-speed tool steel contains carbon and vanadium levels that are intermediate between those of M2 and M4. This gives the steel a fine balance of wear-resistance and grindability, and provides superior resistance to abrasion and edge breakdown.[PDF]

WEAR AND CORROSION BEHAVIOUR OF BORIDED …

WEAR AND CORROSION BEHAVIOUR OF BORIDED AND NITRIDED M2 HIGH SPEED STEEL Y. KAYALI Department of Metallurgical and Materials Engineering, Technology Faculty, Afyon Kocatepe University, 03 200 Afyon, Turkey E-mail: ykayali@aku.edu.tr ABSTRACT Boriding and nitriding lead to improved tribological and corrosive properties of M2 high speed steel.

M2 High Speed Steel - Special steel china supplier-OTAI ...

M2 tool steel high speed steel China stockholders and suppliers- Otai Special steel. The M2 high speed steel is known for its balanced combination of abrasion resistance, toughness and good red …

Amazon: M2 high speed steel cutter

Made with premium grade High Speed Steel M2 precision fully ground for ... IVY Classic 01459 No. 59 Wire Gauge Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 12-Pack. by IVY Classic. $14.40 $ 14 40 Prime. FREE Shipping on eligible orders. Usually ships in 1 to 3 months. 5 out of 5 stars 4.

Mechanomaking of high speed steel AISI M2: powder ...

The synthesis of AISI M2 high speed steel with composition as reported in Table 1, was performed in a high energy high capacity ball mill (MBN HEMill 8) designed for the synthesis of nanophase materials. Starting materials were Fe, Si, Mn, Cr, Mo, V, W (+99%, 60 μm powders) and graphite (45 μm).[PDF]

Thermodynamic Calculation for Silicon ModifiedAISI M2 …

During high speed tool steel production up to 0.2 wt % silicon is added, primarily to react with oxygen e.g. silicon acts as a de-oxidizer. If more than 0.2 wt % silicon is added, it serves to improve the deep hardening properties.

Get In Touch24/7 Support

ADD : XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA

TEL : 0086-371-86151827

FAX : 0086-371-86011881